DOG TRAINER

37.84 €

Ultrasonic Dog Trainer / DOG TRAINER, developed in 2023 and replacing the legendary DAZER II® on the US market.

Technical Specification: combines 4 working modes, 2 ultrasonic frequency settings, as well as their combination with LED flashing light for higher efficiency. It works with a built-in 1600 mAh Li-Ion battery, rechargeable from a USB port and providing hours of autonomous operation.

DOG TRAINER

37.84 €

Ultrasonic Dog Trainer / DOG TRAINER, developed in 2023 and replacing the legendary DAZER II® on the US market.

Technical Specification: combines 4 working modes, 2 ultrasonic frequency settings, as well as their combination with LED flashing light for higher efficiency. It works with a built-in 1600 mAh Li-Ion battery, rechargeable from a USB port and providing hours of autonomous operation.

SKU: 049049 Categories: ,
DOG TRAINER

37.84 €

The Dog Trainer has four operating modes – “Sound”, “Ultrasound”, “Ultrasound + Flashing Light” and “Light / Flashing Light”, each of which has a separate activation button. In addition, “Ultrasound” and “Ultrasound + Flashing Light” modes have two selectable options: Fixed frequency 25kHz or Variable frequency 25kHz-30kHz.

Sound mode

The device emits an audible “beep” signal for 1 second when the “Sound” button is pressed once and a long “beep” signal when it is pressed for a long time.

Ultrasound Mode

The device emits ultrasound for 1 second when the “Ultrasound” Mode button is pressed once, and a continuous ultrasound signal when it is pressed for a long time. By means of the “Frequency 1/Frequency 2/Lock” Switch (on the left side of the unit) Fixed Frequency 25kHz or Variable Frequency 25kHz-30kHz can be selected.

“Ultrasound + Flashing Light” mode

The device emits ultrasound and flashing light when you press and hold the “Ultrasound + Flashing Light” Mode button. Using the “Frequency 1/Frequency 2/Lock” Switch (on the left side of the unit) Fixed Frequency 25kHz or Variable Frequency 25kHz-30kHz can be selected.

Light / Flashing Light Mode

By pressing and holding the “Light / Flashing Light” mode button for one and a half seconds, the device starts emitting constant light. Pressing the button once turns the light on, and pressing it again turns off the mode. Once activated, Light / Flashing Mode can be combined with any of the above modes without interrupting it. Thus, Dog Trainer is 100% complete in night operation.

Vibration function

When activating any of the Ultrasound or Sound modes, the device emits a vibration as long as the corresponding mode button is pressed. Thus, the user has a “confirmation” whenever he has activated the device.

“Operation / Low Battery” light indicator

When activating any of the Ultrasound or Sound modes, the “Operation / Low Battery” Light Indicator lights up in green as long as the corresponding mode button is pressed. When you press and hold the Light / Flashing Mode Button for one and a half seconds, the indicator light will flash briefly and then turn off. When the battery is depleted to a critical level, the indicator light changes to red and starts flashing, then the unit turns off automatically.

Battery Charging Light

When the unit is switched on for charging, the battery charging indicator (located to the left of the charging socket) will glow solid red. When the battery is fully charged, the indicator lights green.

Three Powerful Ultrasonic Emitters and Extended Impact Range

The Dog Trainer is equipped with three ultrasonic/sound emitters, which increases the power and range of impact. The device is maximally effective up to 10 meters, but dogs can usually hear and react to it from a greater distance.

Bright LED Flashlight for Steady/Flashing Light

The LED light source provides walking lighting or a flashing emergency light for the night. Flashing light combined with ultrasound enhances the effect when training or repelling dogs.

Safety Auto Power Off Function

The Dog Trainer automatically turns off the ultrasound after 8 seconds as a protection against misuse.

Technical Specification

• Operating modes: Sound, Ultrasound, Ultrasound + Flashing Light, Constant Light, Flashing Light;

• Choice of Two Ultrasound Options: 25kHz – Fixed Frequency, 25kHz-30kHz – Variable Frequency;

• Ultrasonic/Sound Emitters: 3 pieces;

Light Emitter: 1 piece;

• Zone of Maximum Efficiency with Ultrasound: up to 8-10 meters;

• Battery charging: USB / Type C cable;

• Battery type: Lithium-Ion 1600 mAh;

• Battery Full Charge Time: 2.5 hours;

• Battery capacity in “Sound” mode: up to 15 hours;

• Battery capacity in “Fixed frequency ultrasound” mode: up to 1.5 hours;

• Battery capacity in “Variable frequency ultrasound” mode: up to 1.7 hours;

• Battery capacity in “Ultrasound with a fixed frequency + Flashing Light” Mode: up to 1.3 hours;

• Battery capacity in “Variable Frequency Ultrasound + Flashing Light” Mode: up to 1.5 hours;

• Battery capacity in “Blinking Light” Mode: up to 6-7 hours;

Dimensions, weight: 125mm/55mm/42mm, 130g;

Automatic shutdown: after 8 seconds of ultrasound emission.

Weight 0.3 kg
Description

The Dog Trainer has four operating modes – “Sound”, “Ultrasound”, “Ultrasound + Flashing Light” and “Light / Flashing Light”, each of which has a separate activation button. In addition, “Ultrasound” and “Ultrasound + Flashing Light” modes have two selectable options: Fixed frequency 25kHz or Variable frequency 25kHz-30kHz.

Sound mode

The device emits an audible “beep” signal for 1 second when the “Sound” button is pressed once and a long “beep” signal when it is pressed for a long time.

Ultrasound Mode

The device emits ultrasound for 1 second when the “Ultrasound” Mode button is pressed once, and a continuous ultrasound signal when it is pressed for a long time. By means of the “Frequency 1/Frequency 2/Lock” Switch (on the left side of the unit) Fixed Frequency 25kHz or Variable Frequency 25kHz-30kHz can be selected.

“Ultrasound + Flashing Light” mode

The device emits ultrasound and flashing light when you press and hold the “Ultrasound + Flashing Light” Mode button. Using the “Frequency 1/Frequency 2/Lock” Switch (on the left side of the unit) Fixed Frequency 25kHz or Variable Frequency 25kHz-30kHz can be selected.

Light / Flashing Light Mode

By pressing and holding the “Light / Flashing Light” mode button for one and a half seconds, the device starts emitting constant light. Pressing the button once turns the light on, and pressing it again turns off the mode. Once activated, Light / Flashing Mode can be combined with any of the above modes without interrupting it. Thus, Dog Trainer is 100% complete in night operation.

Vibration function

When activating any of the Ultrasound or Sound modes, the device emits a vibration as long as the corresponding mode button is pressed. Thus, the user has a “confirmation” whenever he has activated the device.

“Operation / Low Battery” light indicator

When activating any of the Ultrasound or Sound modes, the “Operation / Low Battery” Light Indicator lights up in green as long as the corresponding mode button is pressed. When you press and hold the Light / Flashing Mode Button for one and a half seconds, the indicator light will flash briefly and then turn off. When the battery is depleted to a critical level, the indicator light changes to red and starts flashing, then the unit turns off automatically.

Battery Charging Light

When the unit is switched on for charging, the battery charging indicator (located to the left of the charging socket) will glow solid red. When the battery is fully charged, the indicator lights green.

Three Powerful Ultrasonic Emitters and Extended Impact Range

The Dog Trainer is equipped with three ultrasonic/sound emitters, which increases the power and range of impact. The device is maximally effective up to 10 meters, but dogs can usually hear and react to it from a greater distance.

Bright LED Flashlight for Steady/Flashing Light

The LED light source provides walking lighting or a flashing emergency light for the night. Flashing light combined with ultrasound enhances the effect when training or repelling dogs.

Safety Auto Power Off Function

The Dog Trainer automatically turns off the ultrasound after 8 seconds as a protection against misuse.

Technical Specification

• Operating modes: Sound, Ultrasound, Ultrasound + Flashing Light, Constant Light, Flashing Light;

• Choice of Two Ultrasound Options: 25kHz – Fixed Frequency, 25kHz-30kHz – Variable Frequency;

• Ultrasonic/Sound Emitters: 3 pieces;

Light Emitter: 1 piece;

• Zone of Maximum Efficiency with Ultrasound: up to 8-10 meters;

• Battery charging: USB / Type C cable;

• Battery type: Lithium-Ion 1600 mAh;

• Battery Full Charge Time: 2.5 hours;

• Battery capacity in “Sound” mode: up to 15 hours;

• Battery capacity in “Fixed frequency ultrasound” mode: up to 1.5 hours;

• Battery capacity in “Variable frequency ultrasound” mode: up to 1.7 hours;

• Battery capacity in “Ultrasound with a fixed frequency + Flashing Light” Mode: up to 1.3 hours;

• Battery capacity in “Variable Frequency Ultrasound + Flashing Light” Mode: up to 1.5 hours;

• Battery capacity in “Blinking Light” Mode: up to 6-7 hours;

Dimensions, weight: 125mm/55mm/42mm, 130g;

Automatic shutdown: after 8 seconds of ultrasound emission.

The Dog Trainer has four operating modes – “Sound”, “Ultrasound”, “Ultrasound + Flashing Light” and “Light / Flashing Light”, each of which has a separate activation button. In addition, “Ultrasound” and “Ultrasound + Flashing Light” modes have two selectable options: Fixed frequency 25kHz or Variable frequency 25kHz-30kHz.

Sound mode

The device emits an audible “beep” signal for 1 second when the “Sound” button is pressed once and a long “beep” signal when it is pressed for a long time.

Ultrasound Mode

The device emits ultrasound for 1 second when the “Ultrasound” Mode button is pressed once, and a continuous ultrasound signal when it is pressed for a long time. By means of the “Frequency 1/Frequency 2/Lock” Switch (on the left side of the unit) Fixed Frequency 25kHz or Variable Frequency 25kHz-30kHz can be selected.

“Ultrasound + Flashing Light” mode

The device emits ultrasound and flashing light when you press and hold the “Ultrasound + Flashing Light” Mode button. Using the “Frequency 1/Frequency 2/Lock” Switch (on the left side of the unit) Fixed Frequency 25kHz or Variable Frequency 25kHz-30kHz can be selected.

Light / Flashing Light Mode

By pressing and holding the “Light / Flashing Light” mode button for one and a half seconds, the device starts emitting constant light. Pressing the button once turns the light on, and pressing it again turns off the mode. Once activated, Light / Flashing Mode can be combined with any of the above modes without interrupting it. Thus, Dog Trainer is 100% complete in night operation.

Vibration function

When activating any of the Ultrasound or Sound modes, the device emits a vibration as long as the corresponding mode button is pressed. Thus, the user has a “confirmation” whenever he has activated the device.

“Operation / Low Battery” light indicator

When activating any of the Ultrasound or Sound modes, the “Operation / Low Battery” Light Indicator lights up in green as long as the corresponding mode button is pressed. When you press and hold the Light / Flashing Mode Button for one and a half seconds, the indicator light will flash briefly and then turn off. When the battery is depleted to a critical level, the indicator light changes to red and starts flashing, then the unit turns off automatically.

Battery Charging Light

When the unit is switched on for charging, the battery charging indicator (located to the left of the charging socket) will glow solid red. When the battery is fully charged, the indicator lights green.

Three Powerful Ultrasonic Emitters and Extended Impact Range

The Dog Trainer is equipped with three ultrasonic/sound emitters, which increases the power and range of impact. The device is maximally effective up to 10 meters, but dogs can usually hear and react to it from a greater distance.

Bright LED Flashlight for Steady/Flashing Light

The LED light source provides walking lighting or a flashing emergency light for the night. Flashing light combined with ultrasound enhances the effect when training or repelling dogs.

Safety Auto Power Off Function

The Dog Trainer automatically turns off the ultrasound after 8 seconds as a protection against misuse.

Technical Specification

• Operating modes: Sound, Ultrasound, Ultrasound + Flashing Light, Constant Light, Flashing Light;

• Choice of Two Ultrasound Options: 25kHz – Fixed Frequency, 25kHz-30kHz – Variable Frequency;

• Ultrasonic/Sound Emitters: 3 pieces;

Light Emitter: 1 piece;

• Zone of Maximum Efficiency with Ultrasound: up to 8-10 meters;

• Battery charging: USB / Type C cable;

• Battery type: Lithium-Ion 1600 mAh;

• Battery Full Charge Time: 2.5 hours;

• Battery capacity in “Sound” mode: up to 15 hours;

• Battery capacity in “Fixed frequency ultrasound” mode: up to 1.5 hours;

• Battery capacity in “Variable frequency ultrasound” mode: up to 1.7 hours;

• Battery capacity in “Ultrasound with a fixed frequency + Flashing Light” Mode: up to 1.3 hours;

• Battery capacity in “Variable Frequency Ultrasound + Flashing Light” Mode: up to 1.5 hours;

• Battery capacity in “Blinking Light” Mode: up to 6-7 hours;

Dimensions, weight: 125mm/55mm/42mm, 130g;

Automatic shutdown: after 8 seconds of ultrasound emission.

Weight 0.3 kg
In connection with the implementation and application of the General Data Protection Regulation (Regulation (EU) 2016/679), which harmonizes the rules for the protection of personal data in the EU Member States, you can familiarize yourself with the new Privacy Policy and the new Cookies Policy of "ARMS.BG". You can continue to use our website without changing your settings, receiving all the cookies that the site uses, or you can change your cookie settings at any time. It's up to you.